Once the sliding partition walls panel is positioned, they are sealed in place with retractable pressure seals.
Telescopic sleeve panel.
Final closure of the sliding partition wall is achieved by extending a telescopic sleeve on the last panel. The sweep strip simultaneously extends the top and bottom. The rubber sealing strip on the side edge of telescopic panelcan seal the sliding partition wall tightly to reach acoustic integrity.
Sliding partition walls details
How to select the suitable sliding partition walls for your site?
We have 4 types of sliding partition walls,65type,80type,100type and 125 ultra-high type. You can choose the right sliding partition walls upon the Height and Soundproof requirement as following.
BG65-- Max height 3.5m, soundproof: 38dB to 43dB
BG85--Max height:5.5m,Soundproof: 43dB to 53dB
BG100--Max height:7m,Soundproof: 43dB to 58dB
Ultra-height Type---Max height:17m,Soundproof: 38dB to 48dB
What you should do on site?
A beam(truss) should built on site for track installation.The min distance leaving for track installation from false ceiling to top ceiling is 200mm.
How to install?
We will provide the installation manual and video guiding the installation job. We can also dispatch the installation engineer supervising the installation as request.
What is lead time?
The lead time is 7 days to 10 days.
How to transport?
Sea transport is a common mode of transportation. In an emergency, can be air freight.
How do the goods packing?
Corrugating paper packaging, MDF batten cover all around corner.
The sliding partition walls panel and track, fittings will be packed separately.
What is Procurement procedure?
Firstly, send us the shop drawings(if the shop drawings is not available, you can tell us the height from false ceiling to finished floor and width from wall to wall).
Secondly, we offer you the sliding partition walls layout drawings for your confirmation.
Thirdly, we quote the sliding partition walls in accordance with confirmed drawings.
What is finishing face?
The bottom panel is MDF or plywood, which is unfinished face. You can do decoration on site, such as wallpaper, paint, etc.
We can also provide the product with finished face, such as faux wood, Woven fabric and Leather.
Sliding partition walls technical details
|
Panel Suspension
|
Top hunge system without the need for a floor track.
|
|
Panel Width
|
Each panel 600mm-1200mm.
|
|
Track
|
Aluminum OR Steel Track
|
|
Roller on panel
|
Single or Double Roller
|
|
Panel Frames
|
Heavy-duty steel-gusseted aluminum inner frames reinforced with full height.
|
|
Top&bottm seals
|
Top and bottom pressure retractable seals ensure effortless moved and locked.
|
|
Module
|
700mm - 1200mm maximum.
|
|
Panel stacking
|
Numerous panel stacking options for complete flexibility.
|
|
Panel face
|
MDF,Plywood, woven fabric, Leather,Natural wood veneer, Melamine,Wood moldings, etc.
|
|
Finishes
|
Satin anodised or polyester powder coating to all exposed aluminium components available in a wide range of colours as standard.
|
