Folding Movable Partition Soundproof Sliding Acoustic Foldable Partition Walls in Myanmar
Acoustic foldable partition features
1.Flexible:
Acoustic foldable partitions are easily changed to meet requirements of changing environments, whether they are fixed, thus they cannot be relocated.
2.Time Saving
In acoustic foldable partitions’ installation the time from start to finish is considerably faster. By contrast, in installation the loss of time is enormous due to taping, muddling, sanding, painting.
3.Relocatable
The changes in acoustic foldable partitions are extremely easy, while panels are relocated with no mess or carpet repair. Depending on layout, 75% to 100% of the product is reused. However, changes require demolition and disposal of product at a landfill. Carpeted areas need replacing and completely new products are being ordered.
4.Easier in Construction
In acoustic foldable partitions there is the need of only one trade for the install. This results in better project management. On the contrary, to install we follow several trades - steel stud, drywall install, taping and muddling, painting, trims – baseboard, door frame and door install.
Technical Information
| Model | BG-65 series | BG-80 series | BG-100 series | BG-high series |
| Suspension system | Aluminum hanging | Aluminum hanging | Aluminum hanging | Steel hanging |
| Basic thickness | 65mm | 85mm | 100mm | 100mm |
| Total thickness | 65/75/85/95mm | 85/90/100/110mm | 100/120/130mm | 100/120/130mm |
| Max height | Up to 3800mm | Up to 4500mm | Up to 6500mm | Up to 12000mm |
| Width | 600-1230mm | 600-1230mm | 800-1230mm | 800-1230mm |
| Floor/ceiling sealing strength | Telescopic aluminum tube with rubber strip |
| Side walls sealing strength | Double seal tape |
| Sound insulation level | 26dB-30dB | 28dB-34dB | 32-40dB | 32-40dB |
| Panel structure | Aluminum frame with wooden keel | Aluminum frame with steel keel |
| Panel density | 22-28kg/sqm. | 24-32kg/sqm. | 32-50kg/sqm. | 40-68kg/sqm. |
| Surface material | Melamine laminate/fabric/PU leather/wallpaper/veneer/customized |
How to maintain the acoustic foldable partition?
First, The acoustic foldable partition can be wiped with a soft cloth dipped in water or a neutral detergent, can not use ordinary soap and detergent, but can not use detergent, detergent and other strong acid and alkali cleaners.
Second, acoustic foldable partition in the use of the process, should gently push, push and pull along the way;
Third, the acoustic foldable partition ash, deformation is the main reason for the aluminum alloy partition aging, to keep the aluminum alloy cleaner, especially the joints of the joints clean. Vacuum cleaner can be used to suck the dust in the groove and the strip.
Forth, Do not cut or beat directly on the surface of high acoustic foldable partitions with sharp tools so as not to leave scratches, cracks, and holes in the surface.
Fifth, In addition to fabric panels other standard panels can be cleaned, do not use abrasive, strong acid cleaning agent, so as not to damage the surface.
Sixty, Dirtyness - Cleaning Recommendations To remove or reduce dirt, use a full-scale cleaner, or other mild detergent, to dry the cleaner with a damp, soft cloth, then rinse with water.
Seventh, The rubber strip is the key to ensure the sealing, sound insulation and waterproofing of Si-Wei aluminum alloy glass. If there is any detachment, it must be promptly repaired and replaced.
