
Add to Cart
United State Style Removable Conference Room Folding Sliding Partition Walls
How to maintain the sliding partition walls?
1. Track maintenance
1. The sliding partition wall track is divided into high-quality aluminum alloy track and steel track. When performing maintenance, first push the sliding partition walls to the hidden plate or remove the door at the track inspection opening, and check whether the track is worn, Whether the deformation or falling has seriously affected the use of the door. If there is a serious situation, please stop using it immediately, and notify the manufacturer in time for professional inspection and proofreading.
2. Avoid heavy objects directly hitting the sliding partition wall rails (or doors), and avoid sharp objects hitting the rails and leaving scratches, which will affect the appearance.
3. Use a soft cloth to clean the lubricating oil in the rails, and then wipe off the residue with pine perfume.
4. After the above steps are completed, the white lubricating oil can be added. The lubricating oil is generally added with an appropriate amount of lubricating oil at every 600mm interval on the track.
2. Sliding partition wall panel maintenance
1. After pushing the sliding partition wall to a fixed position in sequence, check whether the sliding partition wall is falling or the gap between the door and the door is uneven. If this happens, use an open-end wrench to level the height of the sliding door up and down, and check whether the gap between the door and the door is vertically consistent. Adjust the sliding door to the level and the gap between the doors is the same.
2. Check whether the hanging wheel is loose, if so, please tighten the hanging wheel.
3. Check whether the hanging wheel has been severely worn, which has affected the normal sliding of the sliding door, if any, please notify the manufacturer to replace it.
4. Check if there are any screws loose on the surrounding frame of the sliding door, if any, please tighten it.
5. Check whether the rubber strips around the frame of the sliding door are aging or broken. If it affects the sound insulation performance, please notify the manufacturer to replace it or replace it yourself.
6. Check whether the operating handle is flexible and normal for the operation of moving up and down inside the sliding partition wall door. If the upper and lower support cannot be supported or cannot be rotated, please notify the manufacturer to send a professional for repair, and do not repair by yourself.
7. Do not bring flammable objects close to the sliding partition wall door to avoid fire.
8. Use the sliding partition wall correctly, do not shake it or push or pull it too hard to avoid damage to the parts, please operate according to the instructions.
9. Cleaner can be used to clean the frame of the sliding partition wall door. Use different cleaning agents according to different stains. Avoid using strong acid cleaners to avoid damaging the surface of the frame.
10. In order to enhance the service life of the partition wall, please assign a dedicated person to use it and regularly perform effective maintenance.
11. If there is anything that cannot be handled by yourself during the maintenance process, please contact the manufacturer in time.
Advantages
EBUNGE sliding partition walls, to achieve all-round, multi-space perspective flexible separation, can be repeated folding, space reuse, energy saving, simple and generous, fully demonstrated demonstrate the art of interior space of the space.
High quality. The use of environmentally friendly materials, formaldehyde emission in line with national standards {1.5mg / L}, The sliding partition walls material has strong, durable (abrasion resistance), fire protection, anti-deformation, anti-flammability, anti-aging, fastness, etc.anti-aging;
High noise. Fully meet the five-star hotel noise standards, the highest sound insulation up to 55db (more than 30% stronger than ordinary indoor wall insulation);
Wide range of applications. Sliding partition walls used in the star hotel Banquet Hall, Conference Room, Exhibition Hall, Office, Multi-Function
hall, Ballroom, Training Room, Studio, Convention Hall, etc.
Technical Details
Series | BG65 | BG85 | BG100 |
Panel suspension | Top hung only | Top hung only | Top hung only |
Panel thickness | 65mm | 85mm | 100mm |
Max height | 4000mm | 6000mm | 18000mm |
Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
Face material | 9mm | 9mm | 12 mm |
Pass doors | Single door or Double door | ||
Sound insulation | 28-38dB Rw | 28-42dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather, Insulation board, Fireproof board, Wall paper, Vinyl, Painting, etc. (Customized) |